ESEN ELEKTRONİK LTD.
Download DatasheetTurkce
CD-P3000A / CD-P6000A / CD-P9000A
CD-P Series Capacitive Discharge Power Supplies

Amada Weld Tech’s Benchmark® brand CD-P Series capacitor discharge welding power supplies are field proven solutions for welding applications which require precision, repeatability and low heat affected zone.

These power supplies deliver high peak current in short weld pulses which are suitable for difficult to weld materials like hard, high strength, stamped or drawn steel. Allows the use of much higher currents with low heat propagation preventing oxidation and surface decarburization resulting in joints that exceed manufacturers’ required pushout and torque requirements without damaging the parts. Consistent and repeatable results eliminate the need for post-weld inspections, saving time and money.

CD-P welding power supplies are typically used in the microelectronic, medical, military, sensor and automotive industries which utilize a vast range of materials like kovar, invar, cold rolled steel, hot stamped boron steel like USIBOR, stainless steel and nickel.

TYPICAL APPLICATIONS
KEY FEATURES
ADDED FEATURES
TECHNICAL SPECIFICATONS

Model CD-P3000A CD-P6000A CD-P9000A
Energy range 0.10 - 3.00 kJ 0.10 - 6.00 kJ 0.10 - 6.00 kJ
Capacitance 9,300 µF 18,600 µF 27,900 µF
Maximum Potential 50 - 800 VDC 50 - 800 VDC 50 - 800 VDC
Input Voltage Single phase, 208/240/480 VAC 50/60 Hz
Input Current Adjustable between 15 - 30 A 50/60 Hz
Control circuit protection Zener-referenced closed-loop circuit
Weld Transformer High-efficiency matched weld transformer
Energy repeatability 5% of energy set point
Certification CE, CCC compliant
Note: 12,000 Joule model with matching weld transformer available upon request
WEIGHT & DIMENSIONS

Model CD-P3000A CD-P6000A CD-P9000A
Power supply dimensions
(L x W x H)
35 in x 17 in x 23 in
(89 cm x 43 cm x 59 cm)
35 in x 17 in x 23 in
(89 cm x 43 cm x 59 cm)
35 in x 17 in x 23 in
(89 cm x 43 cm x 59 cm)
Power supply weight 326 lbs (148 kg) 343 lbs (156 kg) 359 lbs (163 kg)
Weld transformer dimensions
(L x W x H)
19 in x 24 in x 27 in
(49 cm x 61 cm x 69 cm)
19 in x 24 in x 27 in
(49 cm x 61 cm x 69 cm)
28 in x 21 in x 28 in
(71 cm x 54 cm x 71 cm)
Weld Transformer weight 780 lbs (355 kg) 780 lbs (355 kg) 1,300 lbs (591 kg)
Note: 12,000 Joule model with matching weld transformer available upon request
 
© 1997-2021 Esen Elektronik Ltd.
All rights reserved. The reproduction of all the information, articles, pictures or drawings presented in this site is subject to approval of Esen Elektronik Ltd. and/or original manufacturing companies.
ESEN ELEKTRONIK MUH. DAN. SAN. VE TIC. LTD. STI.
Yaylagul Sk. 8/4 A. Ayranci 06540 ANKARA TURKEY
Tel:+90 312 468 8114 Fax:+90 312 468 8115